描述
CT11T7F10PN1 PMC676RCTX V2.3 01 16 C1145 CR11 V2.x是一款千兆以太网PMC产品,以下为其详细的产品信息:
一、产品概述
该产品提供了单路或双路10/100/1000BaseTX以太网接口,能够在每个信道上进行全双工操作。它适用于需要高速以太网连接的系统集成商,为嵌入式系统提供了一种简单的方法来添加高速网络连接。
二、以太网特性
端口:提供了2个10/100/1000BaseTX以太网端口。
端口路由:正面配备RJ-45连接器。
性能:支持全双工操作,确保连续、全带宽操作,且PCI开销最小。
三、PCI/PCI-X接口特性
DMA引擎:为每个端口提供了强大的DMA引擎。
FIFO缓冲器:每个端口都有64K字节的FIFO缓冲器。
信号:支持3V和5V信号。
规格:符合PCI 2.2规范。
速度:支持33/66 MHz总线速度。
宽度:32/64位数据宽度。
四、电源规格
总计功率:6瓦。
3.3V时:0.9安培。
5V时:0.6安培。
五、物理特性
外形:单槽PMC。
尺寸:符合标准PMC尺寸。
六、环境参数
工作温度:0至+60°C。
储存温度:-40至+85°C。
运行湿度:5%至95%非冷凝。
储存湿度:5%至95%非冷凝。
七、其他特性
互连:两块PMC676RCTX板可以直接通过简单的“交叉”布线互连,创建全双工1000Mbit专用数据路径,提供高性能且成本极低。
涂层选项:提供丙烯酸或聚氨酯保形涂层。
启动选项:支持Solaris OBP和PXE(预启动执行环境)启动选项。
操作系统支持:软件驱动程序可用于大多数流行的操作系统,包括Windows、Linux、VxWorks、LynxOS和Solaris。
八、应用场景
该产品适用于需要高速、高性能以太网连接的嵌入式系统,如工业自动化、数据中心、网络通信等领域。
CT11T7F10PN1 PMC676RCTX V2.3 01 16 C1145 CR11 V2.x is a Gigabit Ethernet PMC product.The following is its detailed product information:
I.Product Overview
This product provides a single or dual 10/100/1000BaseTX Ethernet interface capable of full-duplex operation on each channel.It is suitable for system integrators who need high-speed Ethernet connections and provides an easy way to add high-speed network connections to embedded systems.
II.Ethernet Features
Port:Provides 2 10/100/1000BaseTX Ethernet ports.
Port Routing:Equipped with RJ-45 connector on the front.
Performance:Supports full-duplex operation,ensuring continuous,full-bandwidth operation with minimal PCI overhead.
III.PCI/PCI-X Interface Features
DMA Engine:Provides a powerful DMA engine for each port.
FIFO Buffer:Each port has a 64K byte FIFO buffer.
Signal:Supports 3V and 5V signals.
Specifications:Compliant with PCI 2.2 specification.
Speed:Supports 33/66 MHz bus speeds.
Width:32/64-bit data width.
4.Power Specifications
Total power:6 watts.
At 3.3V:0.9 amps.
At 5V:0.6 amps.
5.Physical Characteristics
Form Factor:Single-slot PMC.
Dimensions:Conforms to standard PMC dimensions.
6.Environmental Parameters
Operating Temperature:0 to+60°C.
Storage Temperature:-40 to+85°C.
Operating Humidity:5%to 95%non-condensing.
Storage Humidity:5%to 95%non-condensing.
7.Other Features
Interconnection:Two PMC676RCTX boards can be directly interconnected via simple”crossover”wiring to create a full-duplex 1000Mbit dedicated data path,providing high performance at very low cost.
Coating Options:Available in acrylic or polyurethane conformal coatings.
Boot options:Supports Solaris OBP and PXE(Preboot Execution Environment)boot options.
Operating system support:Software drivers are available for most popular operating systems,including Windows,Linux,VxWorks,LynxOS,and Solaris.
8.Application scenarios
This product is suitable for embedded systems that require high-speed,high-performance Ethernet connections,such as industrial automation,data centers,network communications,and other fields.