Description
200-510-076-114 200-510-111-034 VM600 MPC4产品详细解读
产品概述
200-510-076-114 200-510-111-034 VM600 MPC4是一款由Parker Meggitt Vibro-Meter公司生产的高性能监测和保护装置，专为工业机械和设备而设计。它通常被安装在PLC或DCS系统中，用于监测设备的振动状态，并提供早期故障预警，以防止设备的损坏和停机。
产品特点
高精度测量:能够精确测量振动的幅值、频率和相位等参数。
多通道:支持多个通道同时测量，可以对设备的不同部位进行监测。
多种保护功能:提供过振动、不平衡、轴承故障等多种保护功能。
灵活配置:可以通过软件进行灵活配置，适应不同的应用场景。
可靠性高:采用工业级设计，具有较高的可靠性。
产品功能
振动监测:实时监测设备的振动状态，并生成趋势图。
故障诊断:分析振动信号，诊断设备的故障类型。
报警功能:当振动超过设定阈值时，发出报警信号。
数据记录:记录历史数据，便于分析和故障诊断。
应用场景
电机保护:监测电机的振动状态，防止电机过热、轴承损坏等故障。
泵保护:监测泵的振动状态，防止泵轴弯曲、叶轮损坏等故障。
风机保护:监测风机的振动状态，防止叶片脱落、轴承损坏等故障。
压缩机保护:监测压缩机的振动状态，防止活塞环损坏、轴承故障等。
200-510-076-114 200-510-111-034 VM600 MPC4 Product Detailed Interpretation
Product Overview
200-510-076-114 200-510-111-034 VM600 MPC4 is a high-performance monitoring and protection device produced by Parker Meggitt Vibro-Meter,designed for industrial machinery and equipment.It is usually installed in a PLC or DCS system to monitor the vibration status of the equipment and provide early fault warning to prevent equipment damage and downtime.
Product Features
High-precision measurement:It can accurately measure parameters such as amplitude,frequency and phase of vibration.
Multi-channel:It supports simultaneous measurement of multiple channels and can monitor different parts of the equipment.
Multiple protection functions:It provides multiple protection functions such as over-vibration,imbalance,bearing failure,etc.
Flexible configuration:It can be flexibly configured through software to adapt to different application scenarios.
High reliability:It adopts industrial-grade design and has high reliability.
Product functions
Vibration monitoring:monitor the vibration status of the equipment in real time and generate trend charts.
Fault diagnosis:analyze vibration signals and diagnose the fault type of the equipment.
Alarm function:when the vibration exceeds the set threshold,an alarm signal is issued.
Data recording:record historical data for easy analysis and fault diagnosis.
Application scenarios
Motor protection:monitor the vibration status of the motor to prevent motor overheating,bearing damage and other faults.
Pump protection:monitor the vibration status of the pump to prevent pump shaft bending,impeller damage and other faults.
Fan protection:monitor the vibration status of the fan to prevent blade shedding,bearing damage and other faults.
Compressor protection:monitor the vibration status of the compressor to prevent piston ring damage,bearing failure,etc.
